Sort By:
1 2
Prime Line N 6566 Bottom Mount Door Guide Prime Line N7015 2-Piece Adjustable Door Guide Johnson Hardware 1505PPK3 Pocket Door Guide and Bumper Set
N 6566 is a pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth. N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth. Durable white nylon glides, rubber bumper with brass screws.
PART SLIDING DOOR NYLON       BUMPER SET DOOR POCKET        Johnson 150-3PK1 Edge Door Pull 2.94 in L x 0.09 in W x 0.62 in D
This guide uses slotted mounting holes to adjust a pocket door horizontally. Can be used with any door thickness. Lighter weight for hollow core doors. Sold in pairs. RENIN Pocket Door Guide Set, White, Includes: Installation Screws Johnson Hardware Door Edge Pull, Plate Size: 0.09 in, 0.62 in W, 2.94 in H, Aluminum, US3 Brass, Suitable for: 1-3/8 to 1-3/4 in Thick Doors
Johnson 1500 Pocket Door Adapter Kit KIT HARDWARE DOOR CONVERGING  Johnson 1555PPK3 Converging Door Kit
Use for 1-3/4 in Thick doors. Use for joining two Johnson pocket door frames.
ROLLER & BRACKET POCKET DOOR  ROLLER POCKET DOOR ASSY 4 WHL Prime Line N7065 Convex Edge Top Mount Pocket Door Roller Assembly
N 7410 is a four wheeled pocket door roller assembly used on a double track that has a 1-5/8 in inside width with a 1-3/16 in center to center measurement. The four 1 in Dia nylon convex rollers provide a smooth, long-lasting, quiet operation and are affixed to an adjustable stamped steel housing that slides into a stamped steel mounting bracket. Used on a 1-3/8 in thick door and 80 lb. N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of the pocket door opening. It has a dial-adjust wheel that makes it adjustable up to 3/8 in height. It can be used on pocket doors 1 in to 1-3/4 in thick and up to 100 lb. each. N 7065 is a pocket door roller assembly used on Kennaframe, Crawford, Press-Rite and many other bi-fold door manufacturers. It is constructed of a nylon housing with 2 parallel 13/16 in ball bearing nylon rollers which provide for a smooth and quiet operation. This roller rides in a double "J" track and affixes to a stamped steel mounting bracket that clamps it into place after being adjusted to the correct height. This pocket door roller assembly is good for doors up to 100 lb.
KIT HARDWARE DOOR POCKET METAL Schlage 230B3 Edge Dummy Door Lever Johnson 1125PPK1 Door Hanger
Size of 3-7/8 in x 3/4 in x 1-5/8 in. Slim pak, polybagged. Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lb weight capacity. 1 x 3 in plate size.
Hardware kit for 1500 Series pocket door frames includes #1120 hanger, #1513 bumper, #1550 guide, #1712 adjustment wrench and screws. N 6848 is a top, center mounted, adjustable, tricycle style roller assembly. The three 1 in flat durable nylon rollers provide a smooth, long-lasting quiet operation. They are attached to a stamped steel & nylon carriage mounted on top of a threaded steel rod. The threaded rod catches into a bracket that locks it in place. Used on Johnson Bi-pass & Pocket Closet Doors. National Hardware Pocket Door Hardware Kit, Plastic/Steel, Includes: (1) Bumper, (2) Floor Brackets, (2) Guides, (2) Mounting Plates, (2) Wall Brackets, (2) Wheel/Bracket Assemblies and All Nails and Screws Necessary For Assembly
KIT TRACK DOOR POCKET         HANGER SOFT CLOSE/OPEN KT     Johnson Hardware 200 I-beam Door Track
72 in aluminum extruded track with hardware for hanging a pocket door. The 1060 soft-close kit contains a single soft-close actuator only. For single direction soft door operation, the 1060 must be used in combination with a 1125 door hanger. For bi-directional soft door operation two 1060's are required. Soft-close kits can be used to convert current 100 Series installations to soft-close operation or are available prepackaged with select 100 Series hardware sets for new installations. Track can be cut down to shorter lengths. Track mounting screws not included with track lengths.
Johnson 15103068 Door Jamb Kit Johnson 100 Pocket/Sliding Door Track Kit HANGER SOFT CLOSE/OPEN KIT
A fast, convenient method of finishing a pocket door installation. Just cut to length and install. No ripping of special thickness stock. Presanded so finishing is a snap. A versatile single track system, the 100PD designed and packed primarily for "on-the-job" construction of pocket doors, but also usable in combination with itself or other Johnson Series tracks for special installations of sliding doors. Aluminum track with convex rails, jump-proof three-wheel hangers. Heavy-gauge steel components are zinc-plated for a quality appearance. Components are available in bulk for fabricators, as are fixtures for assembly of pocket door frames. Johnson Hardware Soft-Close Hardware Kit, Maximum Weight per Door: 200 lb, Door Thickness: 1 in, Includes: 1712 Adjustment Wrench, 1060 Soft-Close Dampener, 1121 Door Hanger Plate, 611061 Actuator, 1125 Ball Bearing Door Hanger, Mounting Screw
Johnson Hardware 2027SD-1 Pocket Door Hardware Set National Hardware 882 Hardware Kit Johnson 1500 Pocket Door Frame
Kit includes two 2020 hanger, one 1550 door guide, one 1513 door stop. For doors up to 400 lb. National Hardware Pocket Door Hardware, Door Thickness: 3/4 to 1-3/4 in, Aluminum/Particle Board/Steel, Includes: (1) Header and Track Assembly, (4) Jamb Stiffeners, (2) Floor Brackets, (1) Door Guide Set, (2) Snap-in Door Plates, (2) Snap-in Hangers, (1) Bumper, (1) Wrench The 1500 Series standard-duty pocket door frame is designed to carry heavy standard size doors (up to 125 lb each) in standard 2 x 4 timber or steel framed stud walls. The 1500 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 1500 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
Johnson Hardware 200721DR Pocket Door Hardware Set FRAME DOOR POCKET 36 X 80     Johnson Hardware 1500 Pocket Door Frame Kit
The 200PD is commercial-grade hardware ideally suited for heavy door applications where smooth, trouble-free operation and long life is a necessity. The 200PD is primarily designed for on-site pocket door fabrication but can be adapted for use in other various configurations and applications. The heavy-duty extruded aluminum I-beam track is made to precise specifications and zinc-plated ball bearing wheel hangers are manufactured with Johnson's assurance in mind. Heavy-gauge steel components are zinc-plated for a quality appearance. Commercial grade full pocket door frame kit for 2 x 4 wall structures. The 1500HD Series pocket door frame is designed to carry heavy solid core doors weighing up to 200 lb Ball bearing hanger wheels provide feather-touch door operation making the 1500HD one of the smoothest rolling pocket door installations available. The 1500 is designed to be quickly installed into prepared 2 x 4 timber frame stud walls however, the 1500 can also be adapted for use in various wall thicknesses and with various wall materials and structures. The 1500 frame kit is packaged for easy transport and fast installation for either single or converging 2 door applications and all frame sizes can be cut down to accommodate custom size doors.
1 2