Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > SAW BLADES & ACCESSORIES > SAW BLADES - DADO
Sort By:
1
SET BLD SAW 8IN 5/8IN 24 CARB SET DADO PRO 8IN 5/8IN 12 CARB BLD SAW CIR 8IN 5/8IN 12T
Stacking, 8 in carbide dado blade set - 14 pieces. Features blade and chipper teeth with negative hook angles allowing for a less aggressive and smoother cut. Anti-kickback design reduces the possibility of overfeeding. For use with table & radial arm saw. For the weekend woodworker to use on all table and radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. For underpowered saws because requires less power to feed. Negative hook angle makes flat bottom grooves and virtually splinter-free cuts. Anti-kickback design. Resharpenable set produces grooves from 1/4 to 13/16 in, in 1/16 in increments. Includes 2 outside blades, four 2-wing 1/8 in chippers and one 1/16 in chipper, 1/8 in kerf. For use on miter saws. For softwood, hardwoods, plywood and melamine. Extra-sharp, oversized carbide teeth are re-sharpenable. Cuts grooves from 1/4 to 7/8 in. Heat-resistant non-stick coating reduces gumming. Includes: 2 outer blades, 3 chippers, 3 spacers and 7 shims (ranging.004 in to.02 in).
Set BLD Dado 8 in DIA 24 Teeth
For table or radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. Cuts dadoes in everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super-smooth dado bottom and the flexibility of an adjustable dado to handle undersized plywood. Anti-kickback design. Eliminated hub, added extra thick and stiff outside plate and gullet designed for max chip ejection to prevent chip build-up within stack. 3/32 in thick chipper for adjusted cut widths in 1/32 in increments, doubles the number of slot widths available and fits plywood 1/32 in undersized from nominal width with less shimming. Shim set included for fine adjustments. Square tooth design, shorter and thicker, reduces drag in cuts and the materials guiding effects; also increases number of sharpening obtainable. Includes four 1/8 in, one 3/32 in and one 1/16 in chipper, 1/8 in kerf.
   
 
1