Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL) > WELL & JET PUMPS
Sort By:
1
PUMP SHALLOW WELL CAST 1/2HP  PUMP CONVERTIBL WELL CAST1/2HP PUMP JET SHALLOW WELL 3/4HP
Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25 ft depth. 1-1/4 NPT suction, 1 in discharge/drive port, 67 psi maximum pressure, 12.5 gpm flow rate, 1 year warranty from Superior Pump. Rugged cast iron pump body for durability, Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25 ft depth. Can be used in deep well applications. 1-1/4 in NPT suction, 58 psi maximum pressure, 9.9 gpm mas flow rate, 1 in discharge/drive port. Deep well conversion assembly included. 6.4/3.2 A. 1 year warranty from Superior Pump. 3/4 hp dual voltage motor (115/230 V). Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25 ft depth. 7.8/3.9 A, 1-1/4 NPT suction, 1 in discharge/drive port, 20/40 pressure switch, 74 psi max pressure, 13.75 gpm max flow rate. 1 year warranty from Superior Pump.
Sta-Rite Industries FP4012-10 Flotec Franklin Electric RJC-50 Red Lion PUMP JET CONV W/EJECT KIT 1HP
This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less. Ideal for use in shallow well (less than 25 ft) and deep well (25 to 90 ft) applications. Cast iron pump housing for heavy-duty applications. 115/230 V heavy-duty motor with voltage selector for simple connection to existing power source. Includes factory pre-wired 30/50 pressure switch that produces up to 76 psi with automatic shut-off. Rated at 11 gpm. 1 hp dual voltage motor (115/230 V). Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25 ft depth. Can be used in deep well applications. 10/5 A, 115/230 V, 1-1/4 in NPT suction, 71 psi max pressure, 13.2 gpm max flow rate. 1 year warranty from Superior Pump.
Sta-Rite FSNCH-L Sta-Rite Sta-Rite Industries FP4212-08 Flotec Sta-Rite Industries FP4022-08 Flotec
Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dustproof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation. 1-1/4 in NPT suction and 3/4 in NPT discharge. Dual voltage 115/230 V, factory set at 230 V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 V. Pressure switch setting 30 to 50. CSA certified. Rugged cast iron construction. Superior performance at depths to water of 100 ft or less. 1/2 hp pumps up to7.9 gpm. 3/4 hp pumps up to 11.8 gpm. Heavy-duty dual-voltage motor, 1/2 hp preset at 115V, 3/4 hp preset at 230V. Prewired pressure switch preset for 30/50 psi operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately. This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less.
Franklin Electric RJC-75 Red Lion Wayne Pumps CWS75 Deep Well Jet Pumps Wayne Pumps CWS50 Deep Well Jet Pumps
Ideal for use in shallow well (less than 25 ft) and deep well (25 to 90 ft) applications. For heavy-duty applications. 115/230 V heavy-duty motor with voltage selector for simple connection to existing power source. Produces up to 71 psi with automatic shut-off. Cast iron pump housing. Includes factor pre-wire 30/50 pressure switch. Rated at 18 gpm. Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A built-in control valve is available on deep well pumps. Deep well pumps can be mounted to either a pre-charged, conventional type or free- standing pressure tank. Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A built-in control valve is available on deep well pumps. Deep well pumps can be mounted to either a pre-charged, conventional type or free- standing pressure tank.
Sta-Rite Industries FP4222-08 Flotec Sta-Rite Industries FP4032 Flotec Sta-Rite FSNDH Sta-Rite
Rugged cast iron construction. Superior performance at depths to water of 100 ft or less. 1/2 hp pumps up to7.9 gpm. 3/4 hp pumps up to 11.8 gpm. Heavy-duty dual voltage motor 1/2 hp preset at 115 V, 3/4 hp preset at 230 V. Prewired pressure switch preset for 30/50 psi operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately. This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less. Close-grained cast iron body and base, specially treated for corrosion resistance. Provides strong performance with good pressure for wells to 25 ft deep. Self-priming after the priming chamber has been filled with water. Drain port provided for easy winterizing. Pump primes faster and handles more air with a multi-port, precision-molded, reinforced polypropylene diffuser. Motor windings feature insulation materials that protect against excessive moisture and contaminants. Heavy-duty ball bearings are sealed, permanently lubricated and tested to ensure extended life and smooth quiet operation. Built-in jet features a high strength poly-carbonate nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service. Noryl? impeller is precision molded for ideal balance and is ultra-smooth for highest performance and efficiency. Mechanical shaft seal is precision lapped and made of highly polished carbon-ceramic, stainless steel construction, with an internal design for continuous water lubrication. Balanced rotor is die-cast under high pressures for uniform performance and greater efficiency. Pump and motor shaft are stainless steel for maximum corrosion resistance, with a one-piece threaded shaft for positive drive and alignment. Includes a dustproof cover to protect all electrical components from dirt, dusts and insects. Pressure switch with adjustable cut-in and fixed differential (20 psi). 115/230 V.
PUMP CSTIRN CNVRT JET WELL 1HP Franklin Electric RL12G05-3W2V Red Lion Franklin Electric RL12G05-2W1V Red Lion
WAYNE Jet Pump, 3/4 in Connection, NPT Connection, 120/240 V, 1 hp, 1056 gph, 30 to 50 psi, Motor Type: Oil-Filled, Split Phase, Maximum Head: 90 ft, Number of Stages: 1, Cast Iron 4 in submersible deep well pump. Powered by a 3-wire, 230 V industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Franklin Electric RL12G05-2W2V Red Lion Sta-Rite Industries SLC-L Sta-Rite Pro Jet Sta-Rite Industries FP2211 Flotec
4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. The ProJet? SL convertible jet pumps offer a proven cast iron self-priming design. The ProJet? SL convertible jets utilize the built-in regulators, offering easier priming and better range of performance from a complete line of shallow well, 4 in double pipe, 2 in and 3 in single pipe jet packages. 4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.
Sta-Rite Industries FP2212 Flotec Wayne SWS50-8.5FX Pump And Precharged Tank System Franklin Electric RL12G07-2W2V Red Lion
4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use. Shallow well jet pumps are single-stage domestic water pumps designed for pumping portable water in applications where the water is located less than 25 ft vertically from the pump. A pressure switch is a standard feature. The shallow well pump can be mounted to either a pre-charged, conventional type or free-standing pressure tank. 4 in submersible deep well pump. Powered by a 2-wire, industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Franklin Electric RL12G07-3W2V Red Lion Sta-Rite Industries FP2222 Flotec Franklin Electric RL12G10-2W2V Red Lion
WAYNE Submersible Well Pump, 1-1/4 in Connection, FNPT Connection, 230 V, 8 A, 3/4 hp, 12 gpm, 0 to 80 psi, Maximum Head: 240 ft, Stainless Steel, Includes: Control Box 4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use. 4 in submersible deep well pump. Powered by a 2-wire, industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Sta-Rite Industries FP2232 Flotec
4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.
   
 
1