|
|
|
|
|
|
|
|
|
|
|
|
|
|
For removal of stubborn caulk, paint, adhesive residue, tile adhesive and window putty.
|
For sawing. Detailed plunge cuts up to 1-5/8" depth in non-metal materials. High-Carbon steel. 16 teeth per inch.
|
Recommended applications: caulk, sealants, paint, soft adhesives and foam insulation. Users are recommended to hold the blade at a 30 to 40 degree angle to the work surface. Popular projects: removing caulk/sealant in bathrooms, scraping flaky paint, removing old adhesives when restoring vehicles and clearing excess foam.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width - 1-3/8".
|
High-carbon steel cutting edge for general purpose wood cutting applications. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade for accuracy and long life.
|
Aggressive flush cuts and plunge cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. Beveled tooth design for maximum blade durability and versatility. Special design creates cleaner, more accurate flush cuts. For use with all brands of Multi-purpose oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rigid scraper blade for removal of vinyl flooring, bonded carpeting, old coats of varnish/paint and adhesives. Flexible scraper blade for removal of caulk, coats of peeling paint and soft adhesives. For use with all brands of multi-purpose oscillating tools.
|
For sawing. Bi-Metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch.
|
For removal of stubborn paint, adhesive residue, tile adhesive and window putty. Great for cutting carpet and old laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. High-Carbon steel. 12 teeth per inch.
|
Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
|
Recommended applications: tile adhesive, vinyl flooring, epoxy resin, carpet and paint/varnish. Rigid enough to handle toughest scraping applications with less wear. Popular projects: removing caulk or vinyl floors in bathroom or home renovation and removing urethane or adhesive residues in car restorations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. Use with all brands of multi-purpose oscillating tools.
|
For removing elastic sealants, paint adhesive residues, wallpaper, worn gaskets, etc. Cuts carpet, leather, linoleum and similar materials. Universal fit system allow accessory to fit all major brand oscillating tools.
|
For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large area removal of harder materials such as vinyl flooring and bonded carpeting or scraping off coats of paint, varnish or adhesives. Blade is 5.5"x3.9". Use with 122.5929.
|
For removing deep penetrating adhesive, caulking, silicone and other soft bonding materials up to 3" deep. For use with all brands of Multi-Purpose oscillating tools.
|
Recommended applications: copper pipe, thin metal, fiberglass and PVC. Popular projects: plunge cuts or notches in sheet or thin metal for ductwork.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blade is used for making precise cuts in wood, plaster, drywall material in such applications as cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes; can also be used for window restoration to remove glazing. Use with 122.5929.
|
For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. 12 teeth per inch. High-Carbon steel.
|
Recommended applications: asphalt shingles, thin pvc floors, carpet and padding, roofing fabric, cardboard and foam insulation. Special push/pull hooked design for fast, clean, controlled cuts. Popular projects: trimming long sections of insulation or carpet, breaking down boxes and trimming or cutting out shingles to be replaced.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bi-metal 1-3/8" blade for plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 1-9/16" deep. For use with all brands of multi-purpose oscillating tools.
|
Recommended applications: caulk, sealants, paint, soft adhesives and foam insulation. Users are recommended to hold the blade at a 30 to 40 degree angle to the work surface. Popular projects: removing caulk/sealant in bathrooms, scraping flaky paint, removing old adhesives when restoring vehicles and clearing excess foam.
|
For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 14 teeth per inch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended applications: hardwood, wood, PVC and drywall. Up to 2 times faster than standard Imperial wood blades. Double row of triple-ground Japanese toothing. Specifically engineered for precise, clean cuts. Not designed for metal contact. Popular projects: trim, flooring and dowel cuts.
|
For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools.
|
Used for precise cuts and plunge cuts. Designed for cutting wood, drywall, plastic, and soft metal. Applications include flush cutting doorjamb or windowsill, for flooring or tile installation. 1-1/4" depth of cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible scrapers are used for hard to reach areas and removal of soft materials such as caulk. Make sure the blade is flexed during the scraping process. A 30 to 45 degree pitch is recommended. Use with 122.5929.
|
Rigid oscillating blade for scraping. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
15 TPI coarse tooth blade for fast plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 2-1/4" deep. For use with all brands of Multi-Purpose Oscillating tools.
|
|
|
