Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE
Choose a sub category:
STEEL PIPE- GALVANIZED STEEL PIPE-BLACK COPPER TUBING-RIGID
COPPER TUBING-COILS PVC PRESSURE PIPE PVC-DWV PIPE
PVC-SEWER & DRAIN CPVC PIPE / CPVC TUBING ABS PIPE
CORRUGATED DRAIN
Sort By:
1 2 3 ... 6
PP PRESS WTR CLD 10FT PLN PVC PP CUT WTR CLD 2FT PLN 1/2IN PP PRESS WTR CLD 10FT PLN PVC
JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Charlotte Pipe Pipe, Nominal Size: 1/2 in, 2 ft L, 600 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
PP CUT WTR CLD 2FT PLN 3/4IN PP PRESS WTR CLD 10FT PLN PVC PP CUT 1/2IN 2FT PLN 5/8IN SOL
Charlotte Pipe Pipe, Nominal Size: 3/4 in, 2 ft L, 480 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Cut Pipe, Nominal Size: 1/2 in, 5/8 in Dia Outside, 2 ft L, CPVC
PP 1/2IN 12.2MM 15.86MM 10FT PP PRESS WTR CLD 10FT PLN 1IN PP CUT WTR CLD 2FT PLN 1IN PVC
High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 deg F at 100 psi. Sizing equals copper pipe size. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Charlotte Pipe Pipe, Nominal Size: 1 in, 2 ft L, 450 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White
PP DRN 4IN 8FT PVC BLK PP DRN 4IN 8FT PVC BLK PP CUT 3/4IN 2FT PLN 7/8IN SOL
Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in fine soil. Fittings available to adapt to 3 or 4 in, corrugated pipe and 4 in PVC. Ideal for tight spaces and curvy places, taping joints is not necessary. This pipe has spaced slits, so water drains in stages. It's also ideal for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Great for diverting water from one place to another, water will not seep out until it reaches the end of the pipe. Charlotte Pipe Cut Pipe, Nominal Size: 3/4 in, 7/8 in Dia Outside, 2 ft L, CPVC
PP 1/2IN 15.26MM 21.3MM 10FT TUBE 1/2in 2ft CU PP 3/4IN 17.9MM 22.22MM 10FT
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Cresline CPVC Flowguard Gold? pipe is produced using specially formulated CPVC 4120 Flowguard Gold material to meet or exceed ASTM D2846 standards and is NSF-approved for drinking water use. CPVC Flowguard Gold pipe is tan in color with a yellow stripe and is available in plain end.
PP PRESS WTR CLD 20FT PLN PVC PP PRESS WTR CLD 20FT BELLED PP CUT DWV 1-1/2IN 2FT SCH 40
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Charlotte Pipe Cut Pipe, Nominal Size: 1-1/2 in, 2 ft L, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White
PP CUT WTR CLD 2FT PLN 1-1/4IN PP 3/4IN 20.46MM 26.7MM 10FT PP PRESS WTR CLD 20FT BELLED
Charlotte Pipe Pipe, Nominal Size: 1-1/4 in, 2 ft L, 370 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
PP WALL SNGL REG SOL 3IN 10FT TUBE 1/2in 2ft CU PP CUT DWV 2IN 2FT SCH 40 PVC
Our heavy-duty pipe for use in non-pressure drainage applications. Made of high-density polyethylene. CSA approved. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Charlotte Pipe Cut Pipe, Nominal Size: 2 in, 2 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White
PP PRESS WTR CLD 20FT PLN PVC PP PRESS WTR CLD 10FT PLN PVC PP PRESS WTR CLD 20FT BELLED
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
PP CRE CELLULAR FOAM 1-1/2IN TUBE 3/4in 2ft CU TBG COPPER 5FT 1/2IN 1/2IN
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all GENOVA ABS-DWV fittings. Does not rot, rust or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Streamline?? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline?? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline?? copper tube the preferred and specified brand of industry professionals. Mueller Copper Pipe, Nominal Size: 1/2 in, 5 ft L, Type M, Copper
   
 
1 2 3 ... 6