Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS > THREAD SEALANT COMPOUNDS
Sort By:
1 2
COMP THRD PP 1OZ TB 86G/L WHT PP THRD COMP 1-1/4OZ PK HARVEY COMP JNT PP 1OZ TB 3G/L WHT
Harvey? pipe thread stick is a non-hardening gray thread compound designed to lubricate and seal threaded joints on metal pipe. Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included.
COMPOUND JT PIPE 8OZ JAR SLNT THRD PP 1.75OZ TB 0G/L COMP THRD PP 8OZ 11G/L GRY
Oatey?? pipe joint compound is a firm, smooth sealing compound formulated for most metal threads to create tight joints on lines carrying water, steam or air. RECTORSEAL T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle.
SLNT THRD PP 1.75OZ TB 317G/L COMP JNT PP 2OZ TB COMP JNT PP 4OZ CAN 3G/L WHT
RECTORSEAL No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Plumb Pak Pipe Joint Compound, Net Content: 2 oz, Tube Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included.
KT GAS SEAL-N-CHK 15G/L COMP THRD PP 4OZ 86G/L WHT COMP THRD PP 4OZ 119G/L YEL
Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle.
SLNT THRD 0.25PT CAN 6G/L WHT SLNT PP 4OZ CAN 230G/L 45000CP SLNT THRD PP 1OZ TB
Hercules? Real-Tuff? is a multi-purpose, heavy duty white PTFE thread sealant that uses a unique system of fine-grain PTFE particles to fill cracks and thread imperfections. Real-Tuff? holds tight against expansion, contraction and vibration, is non-separating, will not run or drip from joints, contains no lead. Non-hardening lubricating formula permits low torque make-up and easy disassembly without galling or stripping threads. Real-Tuff? withstands temperatures from -200 to 550 deg F and provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2,600 psi. Real-Tuff? is non-flammable and contains no heavy metals or volatile solvents and is applied easily with a natural bristle brush, even at temperatures as low as -25 deg F. RECTORSEAL Tru-Blu? pipe thread sealant with PTFE is a fast dry, flexible set thread sealant designed for high vibration environments such as refrigeration and industrial applications. PTFE has been added to enhance thread lubrication during assembly and break out. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC. Great for use as a positive lock and seal on threaded fasteners. Plumb Pak Pipe Thread Sealant, Net Content: 2 oz, Tube, Applicable Materials: TFE
SLNT THRD PP 4OZ CAN 317G/L SLNT THRD 0.5PT CAN 11G/L GRY COMP THRD PP 16OZ 11G/L GRY
RECTORSEAL No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Hercules? PRO DOPE? is an oil based thread sealant with a uniform, smooth consistency that ensures easy application. PRO DOPE? will not drip, is lead-free, non-toxic and won't spill. It is non-separating and provides a tight, positive, leak-free seal. PRO DOPE? prevents rust and inhibits corrosion by forming a protective coating on threads. It is non-hardening and joints can be disassembled without damage to pipe fittings or threads. PRO DOPE? is easily applied with a natural bristle brush in temperatures as low as -15 deg F and performs over a temperature range of 0 to 350 deg F. PRO DOPE? is a gray colored thread sealant which contains no lead. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle.
SLNT THRD 4OZ CAN 4G/L 30000CP SLNT THRD PP 4OZ CAN 0G/L WHT COMP THRD PP 8OZ 86G/L WHT
Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents. RECTORSEAL T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape.
COMP THRD PP 8OZ 119G/L YEL SLNT THRD PP 8OZ CAN 317G/L SLNT THRD PP 8OZ CAN 0G/L WHT
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle. RECTORSEAL No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. RECTORSEAL T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe.
SLNT GSKT & JNT PP 0.25PT CAN SLNT THRD 1PT CAN 11G/L GRY SLNT GSKT & THRD 0.25PT CAN
Hercules? GRRIP? is an all purpose, non-petroleum, hydrocarbon based pipe joint and gasket seal for use on all metals and on PVC, ABS, CPVC plastics. GRRIP? sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. Provides leakproof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Joints can be disassembled easily, without damage to pipe or equipment. GRRIP? can be removed from skin or clothing, tools or equipment with isopropyl alcohol or Hercules For Hands? hand cleaners. GRRIP? is applied easily with the natural bristle brush even at temperatures as low as +20 deg F and performs over a temperature range of -90 to 450 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure 2600 psi. GRRIP? is a black colored thread sealant which contains no lead. Hercules? PRO DOPE? is an oil based thread sealant with a uniform, smooth consistency that ensures easy application. PRO DOPE? will not drip, is lead-free, non-toxic and won't spill. It is non-separating and provides a tight, positive, leak-free seal. PRO DOPE? prevents rust and inhibits corrosion by forming a protective coating on threads. It is non-hardening and joints can be disassembled without damage to pipe fittings or threads. PRO DOPE? is easily applied with a natural bristle brush in temperatures as low as -15 deg F and performs over a temperature range of 0 to 350 deg F. PRO DOPE? is a gray colored thread sealant which contains no lead. Hercules? Brush-on Block? is an all purpose, high performance pipe joint and gasket sealing compound for use on metals including aluminum, black iron, brass, copper, stainless steel, galvanized steel and plastics, including PVC and CPVC. Block sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. It provides leakproof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Joints can be disassembled easily, without damage to pipe or equipment. Block? can be removed from skin or clothing, tools or equipment with isopropyl alcohol. Block? is applied easily with the natural bristle brush even at temperatures as low as 20 deg F and performs over a temperature range of -90 to 450 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure to 2600 psi.
SLNT THRD 8OZ CAN 4G/L 30000CP SLNT GSKT & JNT PP 0.5PT CAN SLNT THRD 0.5PT CAN 6G/L WHT
Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents. Hercules? GRRIP? is an all purpose, non-petroleum, hydrocarbon based pipe joint and gasket seal for use on all metals and on PVC, ABS, CPVC plastics. GRRIP? sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. Provides leakproof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Joints can be disassembled easily, without damage to pipe or equipment. GRRIP? can be removed from skin or clothing, tools or equipment with isopropyl alcohol or Hercules For Hands? hand cleaners. GRRIP? is applied easily with the natural bristle brush even at temperatures as low as +20 deg F and performs over a temperature range of -90 to 450 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure 2600 psi. GRRIP? is a black colored thread sealant which contains no lead. Hercules? Real-Tuff? is a multi-purpose, heavy duty white PTFE thread sealant that uses a unique system of fine-grain PTFE particles to fill cracks and thread imperfections. Real-Tuff? holds tight against expansion, contraction and vibration, is non-separating, will not run or drip from joints, contains no lead. Non-hardening lubricating formula permits low torque make-up and easy disassembly without galling or stripping threads. Real-Tuff? withstands temperatures from -200 to 550 deg F and provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2,600 psi. Real-Tuff? is non-flammable and contains no heavy metals or volatile solvents and is applied easily with a natural bristle brush, even at temperatures as low as -25 deg F.
   
 
1 2