Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > ELECTRIC DRILLS
Sort By:
1
DRILL ELECTRIC VSR 3/8 INCH   Skil 6238-02 Corded Drill Black & Decker DR260B Compact Corded Drill
Genesis Electric Drill, Amp Rating: 4.2 A, 3/8 in Chuck, Keyless Chuck, Includes: (4) Drill Bits, (1) Double-Ended Screwdriver Bit, Rubberized Non-Slip Grip Handle, Trigger Control, Gray/Green Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high-speeds. 6 ft L cord, maximum hole diameter in hardwood is 3/8 in, softwood is 3/4 in, 120 V, 50-60 Hz, 2600 rpm no load speed and weighs 3.2 lb. Includes carrying bag. Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. 0 to 1500 rpm, capacity in steel is 3/8 in, wood 1 in. Includes one double-ended screwdriving bit and storage bag.
DRILL 3/8 INCH VSR 4.5 AMP    Porter-Cable PC600D Corded Drill Black & Decker DR560 Compact Corded Drill
3/8 in VSR drill with powerful 4.5 A motor. VSR switch for drilling, driving screws, sanding and many other applications. 0 to 3000 rpm. Maximum drilling capacity 3/8 in steel, 3/4 in wood. Large trigger with infinite speed control. 3/8 in keyless chuck for convenience when changing bits. 10 ft cord to allow most uses without an extension cord. Weighs 3.96 lb. Belt clip holds drill securely while working. Lock-on button provides easier control during prolonged use. Soft grip handle improves user comfort and control. Specs: 0-2,500 rpm no load speed, 6 ft power cord, variable-speed trigger, anti-slip comfort grip and weighs 3.2 lbs. Featuring a 360 deg handle for added control, this 7 A 1/2 in drill/driver is powerful enough to handle tough applications. An all metal keyed chuck adds durability and increased bit retention. Variable speed enables controlled drilling and driving.
Hitachi D10VH Lightweight Corded Drill Dewalt D21002 Corded Drill DRILL ELECTRC SPADE HNDL 1/2IN
Features variable speed reversing dial located in switch, lightweight, compact, maximum torque of 108.1 in-lb, form fit palm grip with minimal vibration. 0 to 2500 rpm no load speed, 108.1 in-lb maximum torque, cut capacity of 1 in wood, 3/8 in steel and weighs 3.1 lb. The DWE1014 3/8 in 0 to 2800 rpm VS drill with keyed chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 A motor drills at high-speed according to the user's desired setting. Genesis Drill, Amp Rating: 9 A, 1/2 in Chuck, Keyed Chuck, 6.5 ft Cord Length, Includes: Auxiliary Handle, Chuck Key with Holder, Rear Spade Handle, Gray
Dewalt DWD112 Corded Drill Makita 6408K Corded Drill Milwaukee 0240-20 Right Angle Corded Drill
The DWD112 3/8 in VSR pistol grip drill with keyless chuck has a powerful 8 A motor to deliver 0 to 2500 rpm speed for heavy-duty applications. Features solid bit retention and a soft-grip handle design for comfort. The Makita 6408K 3/8 in drill has a powerful 4.9 A motor with variable speed (0-2500) for a range of applications. Convenience features include a keyless chuck for fast and easy bit installation and removal and an in-line design with a large trigger switch for easy operation. The 6408 has a lower decibel rating (79dB) for quieter operation. The 6408K includes a Tool Case. Reliable performance on the toughest drilling applications. The power and durability of the 3/8 in drill make it the ideal tool for metal drilling, wood drilling and fastening applications. The powerful motor and variable speed trigger deliver speed for fast drilling, while the all metal gear case offers durability and excellent support in high torque applications. The soft-grip handle and two-finger trigger provide added comfort during prolonged use.
Hitachi D13VF Corded Drill Magnum 0300-20 Corded Drill Dewalt DW235G Corded Drill
Metabo HPT Electric Drill, Amp Rating: 9 A, 1/2 in Chuck, Keyed Chuck, 7 in Cord Length, Pistol-Grip Handle, Variable Speed Control, Black/Green Outperforms all other 1/2 in drills in its category. The 1/2 in Magnum? drill has the power and construction to deliver long-lasting performance. The all metal gear case and diaphragm provide high durability on the jobsite. The ergonomic, tactile grip and two-finger trigger optimize user comfort and balance. The DW235G 1/2 in VSR drill is constructed with helical-cut steel and heat-treated steel gears for long life and durability. Rubber grip and two-finger trigger provides comfort and control.
Dewalt DWD210G Corded Drill Dewalt DW245 Corded Drill Magnum 0299-20 Corded Drill
The DWD210G 1/2 in (13 mm) VSR pistol grip drill has a powerful 10 A motor with overload protection to drill at 0 to 1250 rpm in forward or reverse. Constructed with soft-grip handle for comfort and housed in metal gear for durability. The DW245 1/2 in VSR drill is constructed with helical-cut steel and heat-treated steel gears for long life and durability. Rubber grip and two-finger trigger provides comfort and control. Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord and weighs 5.4 lb. Includes side handle and chuck key with holder.
Dewalt DWD215G Corded Drill Makita DP4000 Lightweight Corded Drill Dewalt DW130V Corded Drill
The DWD215G 1/2 in VSR mid-handle grip drill with keyless chuck has a powerful 10 A motor with overload protection to drill at 0 to 1250 rpm in forward or reverse. Constructed with soft-grip handle for comfort and housed in metal gear for durability. The Makita 1/2 in drill (model DP4000) has a powerful 6.5 A motor for heavy-duty continuous work. It includes a large and conveniently located reversing switch and lock-on button. It contains a large two-position side handle for increased operator comfort and control and a convenient belt clip. Ideal for a range of drilling applications. The DW130V 1/2 in spade handle drill features variable speed reversible switch to reduce air bubbles when mixing mud. 120 V motor delivers 0 to 550 rpm to increase torque for drilling and mud mixing. Lightweight and comfortable grip to minimize downtime.
Makita DS4011 Corded Drill Milwaukee 1660-6 Compact Corded Drill
The Makita 1/2 in spade handle drill (model DS4011) features a well-balanced design with a powerful motor engineered for constant power and speed for industrial drilling and mixing applications. The DS4011 has an 8.5 A motor that delivers 600 rpm for increased speed and torque, making it ideal for drilling large holes. The powerful motor is engineered for constant speed for efficient mixing performance. The DS4011 has a heavy-duty industrial 1/2 in drill chuck, with all ball bearing construction for smooth operation and longer tool life. The rocker switch makes it easy to quickly transition between forward and reverse operation. The D-handle rotates 360 deg with 24 positive stops for multi-position operation, with a rubberized grip for increased operator comfort and control. The DS4011 has a well-balanced design and weighs only 6.3 lb for reduced operator fatigue. The DS4011 is ideal for drilling large holes, with consistent speed that also makes it ideal for mixing. This compact specialty drill packs big power. The 1/2 in compact drill has the power and versatility to handle high-torque drilling and material mixing applications. Built for two-handed operation, the drill features extra-long handles for added leverage and control. You'll get quiet performance from the heat-treated, helical-cut gears.
   
 
1