Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > FRAMING ANGLES/ANCHORS
Sort By:
1 2
USP Lumber RT16ATZ Double Plate Hurricane/Seismic Anchor ANGLE 2X4IN TRIPLE ZINC 12GA  ANGLE 2X6IN TRIPLE ZINC 12GA
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces. ML angles are multi-purpose angles that install easily with USP's WS15 wood screws. The staggered fastener pattern allows for back-to-back installations. ML angles are multi-purpose angles that install easily with USP's WS15 wood screws. The staggered fastener pattern allows for back-to-back installations.
USP Lumber RT7A Double Plate Hurricane/Seismic Anchor USP Lumber MP34 Framing Angle USP Lumber RT3A Double Plate Hurricane/Seismic Anchor
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces. Use for joist/header installations. Does not have tabs. G90 galvanizing finish. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-0417.11 and L.A. City RR25303 codes. 18 ga. These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
USP Lumber RT Hurricane/Seismic Anchor USP Lumber KHL33 Heavy Joist Angle USP Lumber RT8A Double Plate Hurricane/Seismic Anchor
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces. Designed for heavy-duty reinforcement of 90 deg framing intersections. USP primer finish. Requires two 5/8 in bolts for installation. Meets ICBO 2725, L.A. City RR 25104. 7 Gauge. These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
USP Lumber ST1-TZ Mud Sill Anchor USP Lumber JA1-TZ Framing Angle USP Lumber BL Corner Brace
For securing mudsills and framing into concrete slabs or poured stem walls. Not for block installation or securing concrete sections together between cold joints. Features prevent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12 in of the end of each section. Meets NER 530 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505, L.A. City RR25303, DSA PA-076 and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 ga. Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections.
U-CLIP 2X-2X TRIPLE ZINC      USP Lumber JA1 Joist Angle USP Lumber MPA1 Framing Angle
A clip connects a 2X wood member to the face of another wood member, 20 ga, G-185 galvanizing finish, requires six USP LumberLok LL915 (#9 x 1-3/8 in L) wood screws not included. Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505; L.A. City RR25303, DSA PA-076; and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 ga. Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
ANGLE 2X-2X TRIPLE ZINC 16GA  USP Lumber MPA1 Framing Angle USP Lumber RT Hurricane/Seismic Anchor
An angle connects two 2X wood members at 90 deg angles, G185 galvanizing finish, requires eight USP LumberLok LL915 (#9 x 1-3/8 in L) wood screws not included. Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
USP Lumber BL Reinforcement Corner Brace USP Lumber ST2-TZ Mud Sill Anchor USP Lumber BL Corner Brace
Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections. For securing mudsills and framing into concrete slabs, poured stem walls or concrete block. Not for securing concrete sections together between cold joints. Features prevent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12 in of the end of each section. Meets NER 530 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections.
USP Lumber SCA Stair Angle USP Lumber WE44-TZ Wet Post Anchor USP Lumber RT10 Double Plate Hurricane/Seismic Anchor
Stair angles simplify stair construction. There is no need to calculate and notch stair stringers. Stronger and safer than wood blocking and the angle and fasteners are hidden from view. Secures posts to concrete in light-duty and medium-duty applications such as patio covers, carports or decks. Formed, one-piece design includes embossing for additional lateral strength. Not for fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning (moment) loads. Requires two 1/2 in HDG bolts or 12 HDG nails for fastening to post. Meets SBCCI, BOCA - NER 530 & NER 608, ICBO 5700, ICBO 2039, ICBO 5531, FL821, FL822, L.A. City RR 25337 and DSA PA-076 codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
USP Lumber CSH-TZ Concealed Stringer Hanger USP Lumber RT16A Double Plate Hurricane/Seismic Anchor USP Lumber A3 Framing Angle
The CSH-TZ concealed stringer hanger provides a method of connecting a stair stringer with a hidden hanger. The seat of the hanger is adjustable to match the slope of the stair stringer. The reversible design allows the connector to be used on the left, right or interior stringers. The CSH-TZ may be used with USP's SCA stair angles for a complete, easy-to-use stair framing solution. . These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces. Eliminates toenailing and increases strength. Requires 10d x 1-1/2 in nails for installation. 1-7/16 in W1 x 1-7/16 in W2 x 2-3/4 in L, 18 ga. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes.
USP Lumber SCA Stair Angle USP Lumber HCPRS Hurricane/Seismic Anchor USP Lumber MPA1-GC Framing Angle
Stair angles simplify stair construction. There is no need to calculate and notch stair stringers. Stronger and safer than wood blocking and the angle and fasteners are hidden from view. These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces. Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
   
 
1 2