|
|
|
|
|
|
|
|
|
|
|
Allied Tube & Conduit EMT Conduit, 1/2 in Trade, 5/8 in ID, 45/64 in OD, Steel, Galvanized, 10 ft Length
|
Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10 ft lengths with one bell end.
|
|
|
|
|
|
|
|
|
|
|
|
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10 ft lengths with one bell end.
|
Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains everything necessary for complete installation including 6 ft conduit, two straight fittings and one 90 deg fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy to install. UL listed components.
|
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
Resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356.
|
|
|
|
|
|
|
|
|
|
|
|
|
JM Eagle's Schedule 40 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
Carlon Flexible Conduit, 3/4 in Trade, PVC, 6 ft Length
|
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
Resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356.
|
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg Celsius. Conforms to UL Standard No 1569 and Article 334.
|
Manufactured from mild steel, allied' s rigid conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red.
|
|
|
|
|
|
|
|
|
|
|
|
|
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg Celsius. Conforms to UL Standard No 1569 and Article 334.
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
Manufactured from mild steel, allied' s rigid conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red.
|
|
|
|
|
|
|
|
|
|
|
|
|
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
For the installation and protection of electrical conductors in circuits of 600 V or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact and crush resistant, liquid tight and highly flexible. UV sunlight-resistant jacket. Rated for temperature range of -30 to 80 deg C, 60 deg C Oil (-22 to +176, 140 deg F Oil). UL listed.
|
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg Celsius. Conforms to UL Standard No 1569 and Article 334.
|
|
|
|
|
|
|
|
|
|
|
|
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
|
Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and downtime due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.
|
|