|
|
|
|
|
|
|
|
|
|
|
|
|
|
These seamless caps keep water off post tops, protecting wood from moisture damage. The PCP's plastic construction is corrosion-proof and paintable.
|
Take the work out of fence post installation and repair with the Speedpost, SFP30 and Speedmender, SMP. The speedpost is used to install 4 x 4 fence posts without digging post holes or pouring concrete. The speed mender plates act as reinforcement brackets for rotted or damaged 4 x 4 fence posts.
|
Post anchors are used to secure wood posts to concrete footings. These post anchors also provide moisture damage protection and feature a 1 in stand-off plate to elevate wood posts above concrete surfaces as required by building code.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. Use two caps for each installation project to act as a unit. Designed to work with single, solid sawn beams, but can be used with build-up beams made of 2x lumber and shims fastened. "-TZ" following item number indicates triple zinc finish. "-GC" following item number indicates Gold Coat finish. Meets ICC-ES ESR-1781, FL18285 and L.A. City RR25843 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 reference pages.
|
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. Use two caps for each installation project to act as a unit. Designed to work with single, solid sawn beams, but can be used with build-up beams made of 2x lumber and shims fastened. "-TZ" following item number indicates Triple Zinc finish. "-GC" following item number indicates Gold Coat finish. Meets ICC-ES ESR-1781, FL18285 and L.A. City RR25843 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
|
These post bases allow installers to pre-align posts and preset post heights above concrete floors or footings. By eliminating post-to-concrete contact, moisture damage is reduced. Elevated post bases are ideal for building carports, decks or porches. All Series feature convenient nail fastening to post.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Post anchors are used to secure wood posts to concrete footings. These post anchors also provide moisture damage protection and feature a 1 in stand-off plate to elevate wood posts above concrete surfaces as required by building code.
|
These post bases allow installers to pre-align posts and preset post heights above concrete floors or footings. By eliminating post-to-concrete contact, moisture damage is reduced. Elevated post bases are ideal for building carports, decks or porches. All Series feature convenient nail fastening to post.
|
Post anchors are used to secure wood posts to concrete footings. These post anchors also provide moisture damage protection and feature a 1 in stand-off plate to elevate wood posts above concrete surfaces as required by building code.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CPB is made of corrosion-resistant composite material compatible with preservative treated lumber. Provides code required 1 in stand-off and can be used with rough lumber sizes.
|
Post anchors are used to secure wood posts to concrete footings. These post anchors also provide moisture damage protection and feature a 1 in stand-off plate to elevate wood posts above concrete surfaces as required by building code.
|
Secures nominal sized post to wood surfaces offering some lateral and uplift resistance. May be used only for intermediate posts between fully anchored corner/end posts in rail system. Not recommended for fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning (moment) loads. Requires 16d HDG fasteners for post and 16d HDG fasteners for base.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Post anchors are used to secure wood posts to concrete footings. These post anchors also provide moisture damage protection and feature a 1 in stand-off plate to elevate wood posts above concrete surfaces as required by building code.
|
Secures 2X joist to posts. Requires 16d HDG nails or 5/8 in HDG bolts for installation. 14 Gauge.
|
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. One piece, designed to work with single, solid sawn beams, but can be used with build-up beams made of 2x lumber and shims fastened together to act as a unit. Requires 16d HDG nails for installation. Meets ICC-ES ESR-1280, FL11664, L.A. City RR25749 and Dade County, FL 07-0306.06 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 18 GAUGE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DTB-TZ deck tie back provides positive anchorage between the deck framing and the exterior wall with a load carrying capacity that exceeds building code requirements. When used in conjunction with USP triple-zinc or gold-coat joist hangers, the DTB-TZ transfers the lateral loads into the exterior wall while the joist hangers support the vertical loads. The DTB-TZ can also be used to reinforce the connection between the rail post and the deck.
|
Post anchors are used to secure wood posts to concrete footings. These post anchors also provide moisture damage protection and feature a 1 in stand-off plate to elevate wood posts above concrete surfaces as required by building code.
|
The CPB is made of corrosion-resistant composite material compatible with preservative treated lumber. Provides code required 1 in stand-off and can be used with rough lumber sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. One piece, designed to work with single, solid sawn beams, but can be used with build-up beams made of 2x lumber and shims fastened together to act as a unit. Requires 16d HDG nails for installation. Meets ICC-ES ESR-1280, FL11664, L.A. City RR25749 and Dade County, FL 07-0306.06 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 18 ga.
|
Secures nominal sized post to wood surfaces offering some lateral and uplift resistance. May be used only for intermediate posts between fully anchored corner/end posts in rail system. Not recommended for fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning (moment) loads. Requires 16d HDG fasteners for post and 16d HDG fasteners for base.
|
|
|
