Home > HARDWARE > GENERAL HARDWARE > CABINET & DRAWER HARDWARE > DRAWER SLIDES
Sort By:
1 2
Prime Line R 7145 Drawer Track Backplate Prime Line R 7133 Drawer Track Backplate Prime Line R 7130 Drawer Track Guide Kit
Used to hold track to back of cabinet, fits most popular side mount rails. Contains two backplates, two sets of installation screws. Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks. Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32 in x 1-3/16 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks.
Prime Line R 7084 Drawer Track Guide Kit Prime Line R 7085 Drawer Track Guide Kit Prime Line R 7154 Drawer Track Guide Kit
Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4 in x 7/8 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track. Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32 in x 1-9/32 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners.
Prime Line R 7152 Drawer Track Guide Kit Prime Line R 7082 Drawer Track Guide Kit Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 3/4 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners. Rollers mount at the front of the drawer opening and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller and 1 set of installation fasteners.
Prime Line R 7132 Drawer Track Back Roller with Plastic Roller Prime Line R 7148 Convex Drawer Track Roller Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws. White nylon, 2-3/4 in socket depth allows 2 in of front to back adjustment of the rail, used on side mounted drawer track systems. Raw finish. Contains 1 left hand bracket, 1 right hand bracket, 2 sets of installation screws.
Prime Line R 7141 Drawer Track Roller BRACKET RR MT F/MDL 84-8450 ZN BRACKET RR MT F/MDL TT100 ZINC
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws. Optional rear mounting socket for face frame application simplifies installation. Non-handed. Hardware included. 3-1/2 in L x 1/2 in W. Zinc finish. Optional rear mounting socket for face frame application simplifies installation. Non-handed. Hardware included. 3-1/2 in L x 1/2 in W. Zinc finish.
BRACKET REAR MNT F/MDL 1805 ZN Prime-Line R 7321 Drawer Track Guide and Glide Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide
Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8 in socket. Used on furniture drawer systems, for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16 in x 3/32 in. Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4 in x 14-1/2 ga.) and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8 in). Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in. Light-duty slide designed for general drawer applications. Mounts with staples or screws. Height of 1 in. Required Clearance:1/8 in each side, 1-1/2 in from rear of drawer to cabinet, drawer to be 3/8 in shallower than opening. High-density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide Knape & Vogt 1300P ZC 12 Drawer Slide Knape & Vogt 1300P ZC 14 Drawer Slide
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
Knape & Vogt 1300P ZC 16 Drawer Slide Knape & Vogt 1300P ZC 18 Drawer Slide Knape & Vogt PBP10016 Precision Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
Knape & Vogt 1300P ZC 20 Drawer Slide Knape & Vogt 1300P ZC 22 Drawer Slide Knape & Vogt PBP10018 Precision Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
   
 
1 2