Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE > PVC-DWV PIPE
Sort By:
1
Genova 700 Dwv Cut Pipe Genova 700 Dwv Cut Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe
Charlotte Pipe Cut Pipe, Nominal Size: 1-1/2 in, 2 ft L, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Cut Pipe, Nominal Size: 2 in, 2 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end.
Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 700 Dwv Cut Pipe Genova 700 Pipe
JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. Charlotte Pipe Cut Pipe, Nominal Size: 3 in, 2 ft L, 260 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
Genova 700 Dwv Cut Pipe Genova 700 Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe
Charlotte Pipe Cut Pipe, Nominal Size: 4 in, 2 ft L, 220 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end.
Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 700 Solvent Weld Dwv Pipe
JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 700 Pipe Genova 700 Solvent Weld Dwv Pipe
PIPE DWV/PVC SCH40 2 X 20
Our Price: $49.51
JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 700 Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe
JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. Lightweight, high impact-resistant and corrosion-proof, resistant to all waste system liquids and gases.
Genova 700 Dual Pressure/Drain Waste Vent Pipe Genova 700 Solvent Weld Dwv Pipe Genova 70042FB DWV Pipe
PIPE DWV/PVC SCH40 3 X 20
Our Price: $95.59
Solvent weld, use for drain-waste-vent applications or with pressure fittings for pressure pipe applications. Lightweight, high impact-resistant and corrosion-proof, resistant to all waste system liquids and gases. psi ratings at 73 deg F range from 180 (6 in pipe) to 330 (1-1/2 in pipe) depending on ID size. Dual-rated for pressure (ASTM D1785) and drainage (ASTM D2665). Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Lightweight, high impact-resistant and corrosion-proof, resistant to all waste system liquids and gases.
Genova 700 Solvent Weld Dwv Pipe Genova 700 Solvent Weld Dwv Pipe Genova 70042B DWV Pipe
JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. JM Eagle's wide line of solvent weld pipe includes PVC Schedule 30 and 40 in solid wall and Schedule 40 in cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, Schedule 30 pipe is available in 3-1/4 in Dia, and Schedule 40 is available in 1/2 in through 16 in Dia. Schedule 40 cellular core is available in 1-1/2 in through 12 in Dia. DWV pipe comes in 10 ft and 20 ft lengths in plain and bell end. JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end.
Genova 700 Solvent Weld Dwv Pipe
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
   
 
1