|
|
|
|
|
|
|
|
|
|
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight steel construction. 3 Knuckles.
|
Lightweight steel construction. 3 Knuckles.
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight steel construction. 3 Knuckles.
|
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included.
|
National Door Hinge, 4 Holes, 2 in Door Leaf Length, 2 in Door Leaf Width, Removable Loose Pin, Used on Interior Doors when Hollow Core or Other Light Weight Doors are Used
|
|
|
|
|
|
|
|
|
|
|
|
|
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
|
505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded.
|
Lightweight steel construction. 3 Knuckles.
|
|
|
|
|
|
|
|
|
|
|
|
|
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded.
|
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included.
|
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included.
|
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Zinc Plated
|
National Door Hinge, Weldable, 6 Holes, 2-1/2 in Door Leaf Length, 2-1/2 in Door Leaf Width, Loose Pin, Used on Interior Doors when Hollow Core or Other Light Weight Doors are Used
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated
|
504. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Loose pin allows doors to be removed without removing hinge. Boxed loose barcoded.
|
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.16 in Hole Diameter, 0.05 in Leaf Thickness, 1 in Door Leaf Length, 1 in Frame Leaf Length, Non-Removable Pin, 0.1 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1 in Overall Width, Cold Rolled Steel, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
National Door Hinge, 6 Holes, 3 in Door Leaf Length, 3 in Door Leaf Width, Loose Pin, Zinc Plated, 504BC, Used on Interior Doors when Hollow Core or Other Light Weight Doors are Used
|
National Hardware Door Hinge, Series: 505BC, Full Mortise, 6 Holes, 0.23 in Hole Diameter, 0.09 in Leaf Thickness, Non-Removable, Riveted Pin, 0.21 in Dia Pin, Fasteners: 5-Knuckle, 43 lb Load Capacity, 2-1/2 in Overall Length, 2.61 in Overall Width, Cold Rolled Steel, Zinc Plated, Standards: BHMA A138.18
|
505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded.
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.23 in Hole Diameter, 0.06 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 10 lb Load Capacity, 2 in Overall Width, Cold Rolled Steel, Zinc Plated
|
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 4 Holes, 0.2 in Hole Diameter, 0.05 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Non-Removable Pin, 0.11 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 7 lb Load Capacity, 1-1/2 in Overall Width, Cold Rolled Steel, Dull Brass
|
National Hardware Narrow Hinge, Flush/Full Inset, Square Corner, Series: V518, 6 Holes, 1/4 in Hole Diameter, 0.06 in Leaf Thickness, 2-1/2 in Door Leaf Length, 2-1/2 in Frame Leaf Length, Non-Removable Pin, 0.12 in Diameter Pin, Steel Pin, Wall Mounting, Fasteners: Screws, 20 lb Load Capacity, 2-1/2 in Overall Width, Cold Rolled Steel, Zinc Plated
|
|