Home > HARDWARE > CONSTRUCTION HARDWARE > BUILDING HARDWARE > FORMED METALS/METAL EAVE DRIPS
Sort By:
1
STRIP STRT GALV STL 3.5INX10FT EDGE DRIP GALV STEEL 3INX10FT Amerimax 77106 Fascia Trim
Amerimax Starter Strip, 10 ft L, 3-1/2 in W, Steel, Galvanized Amerimax Drip Edge, Steel, Material Thickness: 32 ga, Edge Type: Hemmed, Galvanized, Gray, 10 ft L, 3 in W, 1-1/2 in H Maintenance-free painted aluminum. Use in conjunction with soffit pieces. 30 deg baked on polyester top coat, enamel finish, with 0.0175 in thickness.
Amerimax 5601400120 Eave Overhanging Standard Drip Edge Amerimax 5761600120 C-Shaped Drip Edge Amerimax 5701400120 Eave Overhanging Standard Drip Edge
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Overhang gives maximum protection from the roof run-off. Directs run-off into gutters. Used along gutter line of roof edge. Protects and covers roof edge. Acts as a starter strip for a true edge to align shingles. For new construction and re-roofs. 28 ga steel with 0.018 in thickness. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face.
Amerimax 77103 Fascia Trim Amerimax 77223 Fascia Trim Amerimax 77104 Fascia Trim
Maintenance-free painted aluminum. Use in conjunction with soffit pieces. 30 deg baked on polyester top coat, enamel finish, with 0.0175 in thickness. Applies under eaves and cornices. Hemmed for greater strength. Maintenance-free with 0.024 in thickness. Maintenance-free painted aluminum. Use in conjunction with soffit pieces. 30 deg baked on polyester top coat, enamel finish, with 0.0175 in thickness.
Amerimax F-8WA2 Open Hemmed Overhanging Drip Edge Amerimax Economy 5509919120 Eave Overhanging Drip Edge Amerimax Economy 5509900120 Eave Overhanging Drip Edge
Directs run-off into gutters. Used along gutter line of roof edge. Overhang gives maximum protection from roof run-off. Protects and covers roof edge. For new construction and reroofs. Acts as a starter strip for a true edge to align shingles. 6 in x 10 ft to 1 in FACE. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face.
Amerimax 5504500120 Hemmed Standard Drip Edge Amerimax 5504519120 Hemmed Drip Edge EDGE DRIP STD MF AL 4.5INX10FT
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Amerimax Drip Edge Flashing, Aluminum, Material Thickness: 27 ga, Mill, Silver, Profile Type: F4, 10 ft L, 4-1/2 in W, 1 in H
Amerimax F50WA6 Open Hemmed Overhanging Drip Edge Amerimax F55OWB Openface Overhanging Drip Edge
Directs run-off into gutters. Used along gutter line of roof edge. Overhang gives maximum protection from roof run-off. Protects and covers roof edge. For new construction and reroofs. Acts as a starter strip for a true edge to align shingles. 2-7/8 in x 10 ft to 11/16 in Face. Directs run-off into gutters. Used along gutter line of roof edge. Overhang gives maximum protection from roof run-off. Protects and covers roof edge. For new construction and reroofs. Acts as a starter strip for a true edge to align shingles. 3-1/4 in x 10 ft to 11/16 in FACE.
   
 
1