Home > FASTENERS > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - PACKAGED > SCREWS -PKG- TRIM/FINISH -COAT
Sort By:
1 2
SCREW FIN/TRIM 8X1-1/2IN      Camo 0346100 Deck Screw SCREW FIN/TRIM 8X2IN
SCREW FIN/TRIM 8X1-1/2IN
Our Price: $10.89
SCREW FIN/TRIM 8X2IN
Our Price: $13.35
Zero stripping recessed star drive. Trim head for a clean finished look. W-CutT: Low torque, smoother drive. "ZIP-TIP" for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #7, 1-5/8 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit Zero stripping recessed star drive. Trim head for a clean finished look. W-CutT: Low torque, smoother drive. "ZIP-TIP" for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
Camo 0346130 Deck Screw Camo 0345140 Deck Screw Camo 0346150 Deck Screw
CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #7, 2 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit CAMO? Deck screws create a beautiful, fastener-free deck surface. Easy-to-install using either Marksman? tool, CAMO? secures deck boards directly to the joist to reduce board movement and they back out easily in the event a board needs to be replaced. No pre-drilling is required and CAMO? deck screws come with a Limited Lifetime Warranty that assures against rust and corrosion for the life of the project. CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #7, 2-1/2 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit
Camo 0345120 Deck Screw SCREW FIN/TRIM 8X2-1/2IN      SCREW FIN/TRIM WHT 8X2-1/2IN
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $16.00
CAMO? Deck screws create a beautiful, fastener-free deck surface. Easy-to-install using either Marksman? tool, CAMO? secures deck boards directly to the joist to reduce board movement and they back out easily in the event a board needs to be replaced. No pre-drilling is required and CAMO? deck screws come with a Limited Lifetime Warranty that assures against rust and corrosion for the life of the project. Zero stripping recessed star drive. Trim head for a clean finished look. W-CutT: Low torque, smoother drive. "ZIP-TIP" for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-CutT: Low torque, smoother drive. "ZIP-TIP" for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
Camo 0346170 Deck Screw SCREW FIN/TRIM 8X3-1/8IN      Camo 0346190 Deck Screw
SCREW FIN/TRIM 8X3-1/8IN
Our Price: $18.75
CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #7, 3 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit Zero stripping recessed star drive. Trim head for a clean finished look. W-CutT: Low torque, smoother drive. "ZIP-TIP" for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #8, 3-1/2 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit
SCREW FIN/TRIM 9X4IN          SCREW LOW PROFILE NO8X1-1/4IN SCREW FIN/TRIM 9X5IN
SCREW FIN/TRIM 9X4IN
Our Price: $25.23
Zero stripping recessed star drive. Trim head for a clean finished look. W-CutT: Low torque, smoother drive. "ZIP-TIP" for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head. FIN/Trim? screws are an excellent choice for deck rails, exterior/interior trim, joining cabinets and most fine carpentry applications such as crown molding and window/door jambs. It leaves a clean look as the tiny heads disappear when countersunk. Available in #8 and #9 ga Dia in lengths from 1-1/4 to 5 in. Approved for use in all applications that include pressure treated lumber.
Camo 0346104 Deck Screw SCREW FIN/TRIM HEAD 8X2IN     SCREW LOW PROFILE NO8X1-1/2IN
CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #7, 1-5/8 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit PHEINOX? 305 stainless steel screws are corrosion and stain-resistant fasteners designed to withstand wet environments. PHEINOX? 316 stainless steel screws are designed for coastal applications. GRK's patented R4, RSS, FIN/TRIM and RT composite screws are available in PHEINOX? stainless steel. GRK recommends PHEINOX? 305 stainless steels screws for applications that require superior corrosion resistance in wet environments such as decks, boardwalks, pools and hot tubs. PHEINOX? 305 stainless is also recommended for use with cedar, red-wood and various other wood substrates that have higher acid content as well as for composite deck boards. PHEINOX? 305 stainless steels screws are recommended for applications located more than 1 mile from the coast. White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head.
Camo 0345148 Deck Screw Camo 0345128 Deck Screw Camo 0346134 Deck Screw
CAMO? Deck screws create a beautiful, fastener-free deck surface. Easy-to-install using either Marksman? tool, CAMO? secures deck boards directly to the joist to reduce board movement and they back out easily in the event a board needs to be replaced. No pre-drilling is required and CAMO? deck screws come with a Limited Lifetime Warranty that assures against rust and corrosion for the life of the project. CAMO? Deck screws create a beautiful, fastener-free deck surface. Easy-to-install using either Marksman? tool, CAMO? secures deck boards directly to the joist to reduce board movement and they back out easily in the event a board needs to be replaced. No pre-drilling is required and CAMO? deck screws come with a Limited Lifetime Warranty that assures against rust and corrosion for the life of the project. CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #7, 2 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit
SCREW LOW PROFILE NO8 X 2IN   Camo 0346154 Deck Screw Camo 0346174 Deck Screw
White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head. CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #7, 2-1/2 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #7, 3 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit
SCREW TRIM HEAD NO8 X 3-1/8IN SCREW LOW PROFILE NO8X2-1/2IN SCREW TRIM HEAD NO8 X 1-1/2IN
FIN/Trim? screws are an excellent choice for deck rails, exterior/interior trim, joining cabinets and most fine carpentry applications such as crown moulding and window/door jambs. It leaves a clean look as the tiny heads disappear when countersunk. Approved for use in all applications that include pressure treated lumber. White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head. FIN/Trim? screws are an excellent choice for deck rails, exterior/interior trim, joining cabinets and most fine carpentry applications such as crown moulding and window/door jambs. It leaves a clean look as the tiny heads disappear when countersunk. Approved for use in all applications that include pressure treated lumber.
Camo 0346194 Deck Screw Camo 0345144 Deck Screw SCREW LOW PROFILE NO8X3-1/8IN
CAMO Deck Screw, Multi-Purpose, Premium, Thread Size: #8, 3-1/2 in L, Head Type: Trim, Drive Type: Star, Drive Size: T15, Point Type: Type 17 Slash, Carbon Steel, ProTech-Coated, Includes: CAMO T15 Power Bit CAMO? Deck screws create a beautiful, fastener-free deck surface. Easy-to-install using either Marksman? tool, CAMO? secures deck boards directly to the joist to reduce board movement and they back out easily in the event a board needs to be replaced. No pre-drilling is required and CAMO? deck screws come with a Limited Lifetime Warranty that assures against rust and corrosion for the life of the project. White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head.
   
 
1 2