Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL) > PRESSURE REGULATING VALVES
Sort By:
1
Simmons 450-5 Relief Valve Sharkbite EB75 Pressure Regulating Valve VALVE PRESSRE REDUC LF BRZ 1IN
Cast brass finish. Pressure only relief valve. Factory preset at 75 psi. The EB75 is a compact, iron-body pressure reducing and regulating valve designed for installations where small size and economy are important. Because of the iron body, this valve is not recommended for use in potable water applications. The EB75 comes factory set at 45 psi but has an adjustment range of 10 to 70 psi. The valve also comes in a low-pressure range of 0-20 psi. The Apollo 36ELF Series lead-free pressure reducing valve is designed to conserve water and protect water distribution systems by automatically reducing elevated supply pressures. The dezincification resistant bronze body, stainless steel adjusting screw and dielectric polymer cage provide maximum corrosion resistance. Designed for easy in-line servicing with simple cartridge removal.
VALVE PRESSRE REDUC LF BRZ 3/4 Sharkbite EB45 Pressure Regulating Valve Sharkbite EB45 Pressure Regulating Valve
Apollo Valves Reducing Valve, Nominal Size: 3/4 in, FNPT Connection, Operating Pressure: 400 psi, Media: Water, Body Material: Bronze, Dimensions: 3-5/8 in W x 5-1/2 in H, Temperature Rating: 180 deg F The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service. Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge.
Watts LFN45B Pressure Reducing Valve REGULATOR PRESS W/GAUGE 3/4IN Sharkbite EB45 Pressure Regulating Valve
Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Standard pressure setting is 50 psi with an adjustable range of 25 to 75 psi (172 to 517 kPa). The Apollo 3/4 in bronze double union water pressure regulator with gauge sets a new standard in water pressure regulation. It is designed to reduce incoming water pressures to a safe level to protect plumbing fixtures and appliances. With simple adjustability and an instant read, color-coded dial to provide downstream pressure measurement, this valve solves all of the annoyances of pressure regulators from the past. It also assists in the control of pressure surges from entering the structure from the water main to further protect fixtures and appliances. Excessive high pressure within a plumbing system can cause damage over time. A pressure regulator should be installed after the main line to help protect plumbing. Featuring a superior flow rate, durable bronze construction and fitted with either Apollo PEX, Apollo expansion PEX brass barb unions or Tectite by Apollo push-to-connect ends, the 36ELF can be easily integrated into any piping system. The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
Sharkbite EB25 Pressure Regulating Valve Watts LFN45B Pressure Reducing Valve REGULATOR PRESSURE 1/2IN
The EB-25 SS from Cash Acme brings state-of-the-art water control technology to pressure regulators. This version of the EB-25 boasts all of the features of the original, while providing the new benefit of stainless steel internals and 100% lead-free materials of construction. The EB-25 has a convenient orange pressure adjustment twist-cap and numerical indicator which makes installation a quick, one-man job. The unique design also eliminates the water whistle or hum associated with most PRVs, due to innovative "micro-fingers" that dissipate noise as water flows across the seat. Patented single-cartridge design of this valve has fewer parts for increased reliability and can be serviced without having to remove the valve body. While pressure reduction is an everyday need necessary to protect appliances and plumbing fixtures, the advanced water control technology of the EB-25 provides unique new benefits to this common application. The biggest breakthrough is the simple numerical indicator that allows the exact desired pressure to be set even before the valve is installed. Once installed, patented design features mean the EB-25 offers improved reliability and easier access for maintenance. The EB-25 is lead-free and intended for use where supply line pressure does not exceed 300 psi. These valves are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 20 to 90 psi without changing the spring. The EB-25 is suited for either cold or hot (to 180 deg F) water service. Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Standard pressure setting is 50 psi with an adjustable range of 25 to 75 psi (172 to 517 kPa). Union solder inlet connection Feed water pressure regulators are designed to fill the boiler and system piping with water and to maintain water pressure in the system at all times. These valves also provide make up water to the system in the event of system leaks. Features a high capacity performance as well as unique simplified servicing accessibility for complete unitized maintenance. Stainless steel strainer to protect the valve disc from fouling. Purge lever for manual purging.
Sharkbite EB25 Pressure Regulating Valve
The EB-25 SS from Cash Acme brings state-of-the-art water control technology to pressure regulators. This version of the EB-25 boasts all of the features of the original, while providing the new benefit of stainless steel internals and 100% lead-free materials of construction. The EB-25 has a convenient orange pressure adjustment twist-cap and numerical indicator which makes installation a quick, one-man job. The unique design also eliminates the water whistle or hum associated with most PRVs, due to innovative "micro-fingers" that dissipate noise as water flows across the seat. Patented single-cartridge design of this valve has fewer parts for increased reliability and can be serviced without having to remove the valve body. While pressure reduction is an everyday need necessary to protect appliances and plumbing fixtures, the advanced water control technology of the EB-25 provides unique new benefits to this common application. The biggest breakthrough is the simple numerical indicator that allows the exact desired pressure to be set even before the valve is installed. Once installed, patented design features mean the EB-25 offers improved reliability and easier access for maintenance. The EB-25 is lead-free and intended for use where supply line pressure does not exceed 300 psi. These valves are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 20 to 90 psi without changing the spring. The EB-25 is suited for either cold or hot (to 180 deg F) water service.
   
 
1